Bricklaying is one of the few parts of a building job where the price is mostly visible before anyone lifts a trowel. The number of bricks, the height of the wall, the access and the finish all determine the cost, so a bricklayer who has seen the job can price it accurately rather than guessing.
This guide sets out the ranges we work to around Aylesbury, High Wycombe, Buckingham and Milton Keynes, explains what a fair quote includes, and shows the details that separate a price that holds from one that grows once work starts. Figures are for 2026 and exclude VAT unless stated.
Typical brickwork prices in Aylesbury
For straightforward facing brickwork in a wall of reasonable length and height, expect around £1,100 to £1,600 per 1,000 bricks laid, including mortar and labour but not the bricks themselves. A single-skin garden wall of 10 metres at 1.8 metres high is roughly 1,300 bricks and usually lands between £2,000 and £3,500 with footings and a coping.
The brick skin of a single-storey house extension is a different scale of job, typically £6,000 to £12,000 depending on size, the number of openings and how the new walls tie into the existing house. Repointing is priced by area, normally £35 to £60 per square metre for raking out and repointing in lime or cement mortar, with access scaffolding quoted separately.
What a proper brickwork price includes
A written brickwork price should state the bricks and blocks by name, the mortar mix, the number of openings, and whether lintels, wall ties, damp proof course and cavity insulation are supplied. It should say who arranges scaffolding and who pays for it, because that alone can be a four-figure difference between two quotes.
Setting out, building to line and level, forming openings, and cleaning down at the end are all part of the trade. So is protecting the work overnight. If a quote does not mention them, ask, because a cheap price that stops at the top of the wall leaves the expensive decisions to you.
What pushes the price up or down
Access is the biggest hidden cost. Brickwork at the back of a house with a narrow side path needs a mixer, sand and bricks carried by hand, and that adds labour. Working at height adds scaffolding, and a wall that must match an existing brick exactly can mean sourcing reclaimed or a specific manufactured range at a premium.
Details cost money too: arches, soldier courses, plinths, corbelling and ornamental banding all take longer than plain courses. Winter working slows mortar going off and can add days. Conversely, a long straight wall with good access, a standard brick and no openings is the cheapest brickwork there is, which is why two jobs of the same size can differ by a third.
Small jobs, repairs and garden walls
Small work is rarely priced purely on brick count, because getting to the job and setting up takes as long as the building. Expect a minimum charge for a half-day or day, and expect a two-day repoint to cost more per square metre than a large one. Cracked or leaning walls need investigating before anyone prices a repair, since the cause is often a footing or drainage problem rather than the brickwork itself.
Pier and panel garden walls, boundary walls shared with a neighbour, and walls that will carry a gate all need proper footings and, sometimes, a structural opinion. A wall built to look right but not built to stand up is the most expensive kind of saving.
How to compare two brickwork quotes
Put the two documents side by side and check the same five things: the brick specified, whether scaffolding is included, whether footings and drainage are in scope, who is responsible for building control, and what happens if the ground is not what was assumed. A quote that names a brick and includes everything is worth more than a lower number that leaves three of those open.
Ask how many jobs the bricklaying gang will be running at the same time. Two jobs sharing one gang is why some builds stretch from eight weeks to sixteen, and the cost of that delay rarely appears on the quote.
Getting a price you can rely on
We price brickwork after looking at the job, not from a photograph or a rough area, and we put the number in writing with the brick, the scope and the programme stated. If a job needs a structural engineer, a party wall award or building control involvement, we tell you before you commit rather than halfway through.
Around Aylesbury we work on extensions, garden walls, repointing and full new builds, and the same team that prices the work builds it. That means the person who measured the wall is the person laying it.
Common questions
How much does a bricklayer charge per day in Aylesbury?
A skilled bricklayer is generally charged at £250 to £350 per day, with a labourer adding £120 to £180. Most jobs are better priced as a fixed sum for the work, which protects you from slow days and protects the bricklayer from weather.
Is it cheaper to supply my own bricks?
Sometimes, if you have a specific reclaimed brick in mind, but it puts the risk on you: short deliveries, damaged pallets and the wrong brick all become your problem and can hold up the gang. Most homeowners are better off with the bricks supplied and named in the quote.
How many bricks are in a square metre of wall?
A standard 65mm brick laid in a single skin is about 60 bricks per square metre, and a one-brick-thick wall is about 120. Add five to ten per cent for cutting, openings and breakages when you are ordering.
Do I need planning permission for a garden wall?
A wall under two metres high usually needs no permission, and under one metre where it fronts a highway. If you are in a conservation area or the wall is beside a listed building, check first, because the rules are stricter.
Why is repointing so expensive?
It is slow, dusty work done at height: every joint is raked out to depth by hand and refilled before the mortar goes off. On soft old brick it has to be done in lime, which sets slowly and cannot be rushed with a grinder.

